TY  - CONF
AV  - none
TI  - Optimization of injection molding process parameters for a plastic cell phone housing component
ID  - scholars6668
N1  - cited By 0; Conference of 4th International Conference on Fundamental and Applied Sciences, ICFAS 2016 ; Conference Date: 15 August 2016 Through 17 August 2016; Conference Code:125141
N2  - To produce thin-walled plastic items, injection molding process is one of the most widely used application tools. However, to set optimal process parameters is difficult as it may cause to produce faulty items on injected mold like shrinkage. This study aims at to determine such an optimum injection molding process parameters which can reduce the fault of shrinkage on a plastic cell phone cover items. Currently used setting of machines process produced shrinkage and mis-specified length and with dimensions below the limit. Thus, for identification of optimum process parameters, maintaining closer targeted length and width setting magnitudes with minimal variations, more experiments are needed. The mold temperature, injection pressure and screw rotation speed are used as process parameters in this research. For optimal molding process parameters the Response Surface Methods (RSM) is applied. The major contributing factors influencing the responses were identified from analysis of variance (ANOVA) technique. Through verification runs it was found that the shrinkage defect can be minimized with the optimal setting found by RSM. © 2016 Author(s).
SN  - 0094243X
PB  - American Institute of Physics Inc.
Y1  - 2016///
VL  - 1787
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85005950029&doi=10.1063%2f1.4968160&partnerID=40&md5=07de527ac43d99356090133b95c63e8a
A1  - Rajalingam, S.
A1  - Vasant, P.
A1  - Khe, C.S.
A1  - Merican, Z.
A1  - Oo, Z.
ER  -