eprintid: 6433
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/64/33
datestamp: 2023-11-09 16:18:13
lastmod: 2023-11-09 16:18:13
status_changed: 2023-11-09 16:06:03
type: article
metadata_visibility: show
creators_name: Asif, A.
creators_name: Man, Z.
creators_name: Mohd Azizli, K.A.
creators_name: Nuruddin, M.F.
creators_name: Ismail, L.
title: The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating
ispublished: pub
keywords: Aluminum alloys; Coatings; Compressive strength; Fly ash; Geopolymers; Silica; Silicates; Sodium hydroxide, Coating application; Geopolymer; Maximum strength; Si/Al ratio; Sodium silicate; Solid-to-water ratio, Inorganic polymers
note: cited By 12; Conference of 2014 Malaysia-Indonesia Geopolymer Symposium, MIGS 2014 ; Conference Date: 11 May 2014 Through 12 May 2014; Conference Code:107495
abstract: The present study has been performed to see the effect of varying Si/Al ratio (1. 85 to 3) by using same concentration of NaOH and same solid/water ratio for the development of mechanical properties at 28 days of room temperature and also select the Si/Al ratio for coating application. The performance of the geopolymer was investigated on the basis of compressive strengthSEM along with EDS. Pure sodium hydroxide specimens displayed decreased strength. However the combination of sodium hydroxide and sodium silicate specimen with aSi/Al ratio of 2 showed maximum strength, whereas the specimen after Si/Al ratio 2 showed decrease in strength. © (2015) Trans Tech Publications, Switzerland.
date: 2015
publisher: Trans Tech Publications Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907000352&doi=10.4028%2fwww.scientific.net%2fMSF.803.355&partnerID=40&md5=4caca895d2c5bc6e8a508778aa907908
id_number: 10.4028/www.scientific.net/MSF.803.355
full_text_status: none
publication: Materials Science Forum
volume: 803
place_of_pub: Kuala Lumpur
pagerange: 355-361
refereed: TRUE
isbn: 9783038352334
issn: 02555476
citation:   Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L.  (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating.  Materials Science Forum, 803.  pp. 355-361.  ISSN 02555476