eprintid: 6214
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/62/14
datestamp: 2023-11-09 16:17:58
lastmod: 2023-11-09 16:17:58
status_changed: 2023-11-09 16:05:17
type: conference_item
metadata_visibility: show
creators_name: Khanh, D.V.K.
creators_name: Vasant, P.M.
creators_name: Elamvazuthi, I.
creators_name: Dieu, V.N.
title: Geometric optimization of thermo-electric coolers using simulated annealing
ispublished: pub
keywords: Constraint theory; Conversion efficiency; Cooling; Cooling systems; Energy conversion; Heat flux; Oil well drilling; Thermoelectricity, Cooling mechanism; Design parameters; Equality constraints; Extreme environment; Geometric optimization; Inequality constraint; Material parameter; Thermoelectric cooler, Simulated annealing
note: cited By 2; Conference of 7th International Conference on Cooling and Heating Technologies, ICCHT 2014 ; Conference Date: 4 November 2014 Through 6 November 2014; Conference Code:116710
abstract: The field of thermo-electric coolers (TECs) has grown drastically in recent years. In an extreme environment as thermal energy and gas drilling operations, TEC is an effective cooling mechanism for instrument. However, limitations such as the relatively low energy conversion efficiency and ability to dissipate only a limited amount of heat flux may seriously damage the lifetime and performance of the instrument. Until now, many researches were conducted to expand the efficiency of TECs. The material parameters are the most significant, but they are restricted by currently available materials and module fabricating technologies. Therefore, the main objective of finding the optimal TECs design is to define a set of design parameters. In this paper, a new method of optimizing the dimension of TECs using simulated annealing (SA), to maximize the rate of refrigeration (ROR) was proposed. Equality constraint and inequality constraint were taken into consideration. This work reveals that SA shows better performance than Cheng's work.
date: 2015
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84948407907&doi=10.1088%2f1757-899X%2f88%2f1%2f012012&partnerID=40&md5=f556ea6c919cf580ef47316153c5f7de
id_number: 10.1088/1757-899X/88/1/012012
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 88
number: 1
refereed: TRUE
issn: 17578981
citation:   Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N.  (2015) Geometric optimization of thermo-electric coolers using simulated annealing.  In: UNSPECIFIED.