eprintid: 6101
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/61/01
datestamp: 2023-11-09 16:17:51
lastmod: 2023-11-09 16:17:51
status_changed: 2023-11-09 16:04:52
type: article
metadata_visibility: show
creators_name: Aswin, M.
creators_name: Mohammed, B.S.
creators_name: Liew, M.S.
creators_name: Syed, Z.I.
title: Prediction of RC beams failure load using non-linear finite element analysis
ispublished: pub
note: cited By 1
abstract: This paper presents the results of non-liner finite element analysis using commercial package of VecTor2 performed on different types of RC beams. Three types of RC beams were considered from available literatures which are; simply supported RC deep beams with web openings, continuous RC deep beams with web openings and simply supported RC dapped-end beams. Two responses were analyzed and compared to the experimental results which are failure load and failure mode. It has been found that the ratio of the analytical failure load to the experimental failure load very close to 1. In addition, the experimental failure modes were depicted accurately. © Research India Publications.
date: 2015
publisher: Research India Publications
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84973165091&partnerID=40&md5=03676a83382da1e675bb7826b0433628
full_text_status: none
publication: International Journal of Applied Engineering Research
volume: 10
number: 22
pagerange: 42974-42980
refereed: TRUE
issn: 09734562
citation:   Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I.  (2015) Prediction of RC beams failure load using non-linear finite element analysis.  International Journal of Applied Engineering Research, 10 (22).  pp. 42974-42980.  ISSN 09734562