%I Elsevier
%P 235-240
%R 10.1016/j.cep.2015.06.018
%V 95
%T Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion
%J Chemical Engineering and Processing: Process Intensification
%O cited By 103
%X This paper investigates a new route for intensification of methyl ester synthesis in Malaysia via alkali-catalysed transesterification of waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. The effects of the oil to methanol molar ratio (1:4-1:7), catalyst loading concentration (0.5-1.25wt) and reaction temperature (50-65°C) have been investigated using an optimised plate with 21 holes of 1mm diameter and an inlet pressure of 2bar in a 50L of hydrodynamic cavitation reactor assisted by a double diaphragm pump. Optimal conversion of 98.1 was achieved in 15min in a hydrodynamic cavitation reactor with 1:6 molar ratio of oil to methanol, 1wt of catalyst and 60°C of reaction temperature. It has been observed that a significant reduction in the optimum reaction time (about 6 fold) for transesterification from 90min for mechanical stirring approach to 15min for the hydrodynamic cavitation approach. Optimal yield efficiency of 12.50�10-4g/J was found using hydrodynamic cavitation and it was 8 fold higher than 1.5�10-4g/J when mechanical stirring was used. © 2015 Elsevier B.V.
%K Biodiesel; Catalysts; Cavitation; Esterification; Esters; Fluid dynamics; Hydrodynamics; Methanol; Oils and fats; Synthetic fuels; Transesterification, Biodiesel synthesis; Hydrodynamic cavitations; Intensification; Operating parameters; Waste cooking oil, Palm oil
%L scholars5780
%A L.F. Chuah
%A S. Yusup
%A A.R. Abd Aziz
%A A. Bokhari
%A J.J. Klemeš
%A M.Z. Abdullah
%D 2015