eprintid: 5776
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/57/76
datestamp: 2023-11-09 16:17:31
lastmod: 2023-11-09 16:17:31
status_changed: 2023-11-09 16:03:51
type: article
metadata_visibility: show
creators_name: Mahmod, M.F.
creators_name: Bakar, E.A.
creators_name: Othman, A.R.
creators_name: Ramzi, A.R.
creators_name: Goh, C.Y.
title: Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit
ispublished: pub
note: cited By 3
abstract: Ultrasonic is a common non-destructive testing for composite laminates inspection. However, high cost caused limited budget organization to own this equipment for their research activities. Our work seeks to develop an automated and reliable ultrasonic scanning unit with affordable cost. The validation of scanning speed using Arduino UNO Microcontroller has successfully achieved by determined the stepping mode. This prototype is suggested to inspect surface defect on glass fiber composite laminates up to 6 mm in thickness as the probe limitation for optimum scanning performance. The optimum scanning speed for this prototype was 12 mm/sec using micro step setup while the average percentage of different against ten times inspection are as low as five percent. © 2015 Penerbit UTM Press. All rights reserved.
date: 2015
publisher: Penerbit UTM Press
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84940645260&doi=10.11113%2fjt.v76.3970&partnerID=40&md5=2de965be4728efde511f98471abae2c8
id_number: 10.11113/jt.v76.3970
full_text_status: none
publication: Jurnal Teknologi
volume: 76
number: 1
pagerange: 147-155
refereed: TRUE
issn: 01279696
citation:   Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y.  (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit.  Jurnal Teknologi, 76 (1).  pp. 147-155.  ISSN 01279696