TY  - JOUR
ID  - scholars5621
TI  - Electrochemical and Dry Sand Impact Erosion Studies on Carbon Steel
N1  - cited By 19
N2  - This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45μm and 150μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45μm and 150μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5 (by weight) of sand particles. LPR of the samples treated with 45μm and 150μm sand slurries was calculated about 949Ω.cm2 and 809Ω.cm2, respectively. © 2015, Nature Publishing Group. All rights reserved.
AV  - none
VL  - 5
JF  - Scientific Reports
A1  - Naz, M.Y.
A1  - Ismail, N.I.
A1  - Sulaiman, S.A.
A1  - Shukrullah, S.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84946925186&doi=10.1038%2fsrep16583&partnerID=40&md5=9fafe91115f5bb724fe7919746734acc
PB  - Nature Publishing Group
SN  - 20452322
Y1  - 2015///
ER  -