eprintid: 5387
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/53/87
datestamp: 2023-11-09 16:17:07
lastmod: 2023-11-09 16:17:07
status_changed: 2023-11-09 16:01:30
type: article
metadata_visibility: show
creators_name: Bataee, M.
creators_name: Irawan, S.
creators_name: Kamyab, M.
title: Artificial neural network model for prediction of drilling rate of penetration and optimization of parameters
ispublished: pub
keywords: Cost reduction; Forecasting; Neural networks; Parameter estimation; Well drilling, Artificial neural network modeling; Differential pressures; Drilling optimization; Logical relationships; Optimization of parameters; Optimization programs; Penetration rates; Rate of penetration, Optimization
note: cited By 34
abstract: According to field data, there are several methods to reduce the drilling cost of new wells. One of these methods is the optimization of drilling parameters to obtain the maximum available rate of penetration (ROP). There are too many parameters affecting on ROP like hole cleaning (including drillstring rotation speed (N), mud rheology, weight on bit (WOB) and floundering phenomena), bit tooth wear, formation hardness (including depth and type of formation), differential pressure (including mud weight) and etc. Therefore, developing a logical relationship among them to assist in proper ROP selection is extremely necessary and complicated though. In such a case, Artificial Neural Networks (ANNs) is proven to be helpful in recognizing complex connections between these variables. In literature, there were various applicable models to predict ROP such as Bourgoyne and Young's model, Bingham model and the modified Warren model. It is desired to calculate and predict the proper model of ROP by using the above models and then verify the validity of each by comparing with the field data. To optimize the drilling parameters, it is required that an appropriate ROP model to be selected until the acceptable results are obtained. An optimization program will optimize the drilling parameters which can be used in future works and also leads us to more accurate time estimation. The present study is optimizing the drilling parameters, predicting the proper penetration rate, estimating the drilling time of the well and eventually reducing the drilling cost for future wells.
date: 2014
publisher: Japan Petroleum Institute
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84899762125&doi=10.1627%2fjpi.57.65&partnerID=40&md5=61ea5833151722eaa2e49532b3121b93
id_number: 10.1627/jpi.57.65
full_text_status: none
publication: Journal of the Japan Petroleum Institute
volume: 57
number: 2
pagerange: 65-70
refereed: TRUE
issn: 13468804
citation:   Bataee, M. and Irawan, S. and Kamyab, M.  (2014) Artificial neural network model for prediction of drilling rate of penetration and optimization of parameters.  Journal of the Japan Petroleum Institute, 57 (2).  pp. 65-70.  ISSN 13468804