eprintid: 5229
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/52/29
datestamp: 2023-11-09 16:16:57
lastmod: 2023-11-09 16:16:57
status_changed: 2023-11-09 16:01:00
type: article
metadata_visibility: show
creators_name: Palaniandy, D.K.
creators_name: Syed, Z.I.
creators_name: Liew, M.S.
creators_name: Karuppanan, S.
title: Broadside vessel collision forces for conventional riser-guard
ispublished: pub
keywords: Design; Disaster prevention; Drilling platforms; Finite element method; Service vessels, Conventional riser-guard; Design optimisation; Displacement vessels; Finite element modelling; Impulse load; Offshore service vessels; Oil and gas operators; Vessel collision, Marine risers
note: cited By 0
abstract: Oil and gas operators have taken considerable amount of measures to prevent offshore service vessel collision with risers, especially in the wake of the Mumbai High North disaster. One of the measures taken is the installation of steel riser-guards on fixed offshore jacket platforms. The conventional riser-guard however, has been associated with several design related issues, which provide room for further design optimisation, or even a potential replacement with other alternatives. Quantification and selection of appropriate design load for riser-guard system is highly desirable for design improvement and optimization. This study attempts to investigate and establish the impulse loads equivalent to the broadside collision of a 2500 tonne displacement vessel with the conventional riser-guard. Parametric study was performed to investigate the effects of varying width to the resulting impulse load equivalent to vessel collision forces. General purpose finite element modelling software was used to perform dynamic analysis and establish the equivalent impact loads. © (2014) Trans Tech Publications, Switzerland.
date: 2014
publisher: Trans Tech Publications Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84903539064&doi=10.4028%2fwww.scientific.net%2fAMM.567.210&partnerID=40&md5=cafe2a15d74e15b914d71c536a6b8d28
id_number: 10.4028/www.scientific.net/AMM.567.210
full_text_status: none
publication: Applied Mechanics and Materials
volume: 567
pagerange: 210-215
refereed: TRUE
isbn: 9783038351238
issn: 16609336
citation:   Palaniandy, D.K. and Syed, Z.I. and Liew, M.S. and Karuppanan, S.  (2014) Broadside vessel collision forces for conventional riser-guard.  Applied Mechanics and Materials, 567.  pp. 210-215.  ISSN 16609336