eprintid: 4737
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/47/37
datestamp: 2023-11-09 16:16:26
lastmod: 2023-11-09 16:16:26
status_changed: 2023-11-09 15:59:18
type: article
metadata_visibility: show
creators_name: Irfan Khan, M.
creators_name: Azizli, K.
creators_name: Sufian, S.
creators_name: Man, Z.
title: Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material
ispublished: pub
keywords: Adhesion; Bond strength (materials); Coatings; Curing; Fly ash; Geopolymers; Inorganic polymers; Microscopic examination; Silicon; Sodium; Surface roughness, Ash particles; Coating material; Curing time; Elcometer 108; Geopolymer; Geopolymerisation; Si/Al ratio; Surface profiles, Strength of materials
note: cited By 14; Conference of 3rd International Conference on Process Engineering and Advanced Materials, ICPEAM 2014 ; Conference Date: 3 June 2014 Through 5 June 2014; Conference Code:114811
abstract: In this study fly ash based aluminosilicate coatings were formulated and the effect of the Na/Al, Si/Al ratios, and curing time upon adhesion strength of geopolymeric coating was measured using Elcometer 108. Geopolymer gained their maximum adhesion within first three days. After 3 days curing on 60oC resulted into a maximum adhesion strength of 10MPa at Si/Al=3 and Na/Al=1.0. Micro structural analysis and Infra red spectroscopy was used to study the geopolymerisation process. Surface profile of fly ash particles shown that degree of reactivity has a direct relation with their surface roughness. © 2014 Trans Tech Publications, Switzerland.
date: 2014
publisher: Trans Tech Publications Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84914145161&doi=10.4028%2fwww.scientific.net%2fAMM.625.85&partnerID=40&md5=dcfc2351416edf58c4e269ab96e578c8
id_number: 10.4028/www.scientific.net/AMM.625.85
full_text_status: none
publication: Applied Mechanics and Materials
volume: 625
pagerange: 85-89
refereed: TRUE
isbn: 9783038351818
issn: 16609336
citation:   Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z.  (2014) Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material.  Applied Mechanics and Materials, 625.  pp. 85-89.  ISSN 16609336