eprintid: 4374
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/43/74
datestamp: 2023-11-09 16:16:03
lastmod: 2023-11-09 16:16:03
status_changed: 2023-11-09 15:58:18
type: article
metadata_visibility: show
creators_name: Elsheikh, Y.A.
creators_name: Man, Z.
creators_name: Bustam, M.A.
creators_name: Akhtar, F.H.
creators_name: Yusup, S.
creators_name: Muhammad, A.
title: Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification
ispublished: pub
note: cited By 11
abstract: A non-edible oil of Citrulus colocynthis was investigated as a prospective feedstock for biodiesel production by transesterification reaction with methanol. The content of fatty acid methyl ester in the produced oil obtained by four alkaline-catalysed transesterifications, i.e. sodium hydroxide, sodium methoxide, potassium methoxide and potassium hydroxide was evaluated. Important fuel properties of the produced biodiesel such as ester content, density, kinematic viscosity and acid value were measured and compared. The ester ingredients in the biodiesel product were myristic, palmitic, stearic, oleic and linolenic. The best quality of Citrulus colocynthis oil at the highest yield of 97.8 was produced at a constant mixing rate of 600rpm, methanol/oil molar ratio of 6:1, 60°C reaction temperature for 60min, using 1.0wt of NaOH. © 2013 Canadian Society for Chemical Engineering.
date: 2014
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84895063675&doi=10.1002%2fcjce.21846&partnerID=40&md5=6371317d6802bd4d110b66772afdb333
id_number: 10.1002/cjce.21846
full_text_status: none
publication: Canadian Journal of Chemical Engineering
volume: 92
number: 3
pagerange: 435-440
refereed: TRUE
issn: 00084034
citation:   Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Akhtar, F.H. and Yusup, S. and Muhammad, A.  (2014) Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification.  Canadian Journal of Chemical Engineering, 92 (3).  pp. 435-440.  ISSN 00084034