eprintid: 3927
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/39/27
datestamp: 2023-11-09 15:52:12
lastmod: 2023-11-09 15:52:12
status_changed: 2023-11-09 15:47:56
type: article
metadata_visibility: show
creators_name: Moghadam, R.A.
creators_name: Yusup, S.
creators_name: Lam, H.L.
creators_name: Shoaibi, A.A.
creators_name: Ahmad, M.M.
title: Hydrogen production from mixture of biomass and polyethylene waste in fluidized bed catalytic steam co-gasification process
ispublished: pub
keywords: Blending; Fluidized bed process; Fluidized beds; Fossil fuel deposits; Fossil fuels; Gasification; Polyethylenes, Catalytic steam gasifications; Energy from renewable sources; Fluidized bed gasifiers; Fossil fuel resources; Hydrogen yields; Palm kernel shells; Polyethylene wastes; Production efficiency, Hydrogen production
note: cited By 33
abstract: Energy from renewable source is expected to complement the energy derived from fossil fuel resources. In current research, an efficient method to produce hydrogen by blending palm kernel shell (PKS) with polyethylene (PE) waste via catalytic steam gasification is studied at pilot scale fluidized bed gasifier. This paper reports the results obtained from a series of experiment that have been performed to improve the hydrogen production efficiency. By mixing the PE waste with biomass and using those as feedstock revealed an increase in the product gas volume percent and hydrogen yield. The highest H2 content 76.18 vol achieved at 800 oC using 25 wt of PE mixed with PKS. A fuel gas with a calorific value up to 15.98 MJ/Nm3 was produced which has the potential to be used in engines. Copyright © 2013, AIDIC Servizi S.r.l.
date: 2013
publisher: Italian Association of Chemical Engineering - AIDIC
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84886431764&doi=10.3303%2fCET1335094&partnerID=40&md5=4a04e74b5c36009696465b0107e1d6eb
id_number: 10.3303/CET1335094
full_text_status: none
publication: Chemical Engineering Transactions
volume: 35
pagerange: 565-570
refereed: TRUE
issn: 22839216
citation:   Moghadam, R.A. and Yusup, S. and Lam, H.L. and Shoaibi, A.A. and Ahmad, M.M.  (2013) Hydrogen production from mixture of biomass and polyethylene waste in fluidized bed catalytic steam co-gasification process.  Chemical Engineering Transactions, 35.  pp. 565-570.  ISSN 22839216