TY  - CONF
SN  - 17426588
PB  - Institute of Physics Publishing
Y1  - 2013///
VL  - 476
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84891777909&doi=10.1088%2f1742-6596%2f476%2f1%2f012120&partnerID=40&md5=caa13b378d8afcbd8436832386b5afe8
A1  - Ahmad, M.R.
A1  - Md Khir, M.H.
A1  - Dennis, J.O.
A1  - Zain, A.M.
AV  - none
CY  - London
KW  - CMOS integrated circuits; Electrets; Electrodes; Electrostatic devices; Electrostatic generators; Electrostatics; Energy conversion; Energy harvesting; Fabrication; MEMS; Nanotechnology; Serpentine; Silicate minerals; Silicon nitride; Silicon oxides; Silicon wafers
KW  -  Ambient vibrations; Electret materials; Electrostatic energies; Fabrication and characterizations; Micro electromechanical system (MEMS); Standard CMOS technology; Substrate temperature; Trapezoidal electrodes
KW  -  Characterization
TI  - Fabrication and characterization of the electrets material for electrostatic energy harvester
ID  - scholars3904
N2  - Electrostatic energy harvesting devices have been found feasible to convert ambient vibrations into electrical energy. Fabrications of such devices are carried out using standard CMOS technology. This paper explains the fabrications processes of the energy harvesting components and the characterizations of the electret material for the electrostatic energy harvester device. The electrostatic energy harvester components are made up of the trapezoidal electrodes and electrets structures. The aluminum-silicon-copper (AlSiCu) electrodes reside on the Micro Electro-Mechanical System (MEMS) structure of 25 mm2 and comprises the seismic mass and serpentine beams. On the other hand, the electrets which made up of Silicon Dioxide (SiO2) and Silicon Nitride (Si3N4) material, are fabricated separately. A 0.35 μm CMOS processes technology is utilized to fabricate the electrodes and electrets structures onto 200 mm silicon wafers. The performance of the energy harvester is evaluated through the characterizations of the electrets material. The electrets are charged with the Corona charging method and the surface potential is measured. From the experiment, it is proven that the CVD oxides is chargeable at 4.7 kV Corona voltage, 200 V grid voltage, 10 minutes charging time and 70°C substrate temperature, hence it is a recommended material for electrostatic energy harvester device. © Published under licence by IOP Publishing Ltd.
N1  - cited By 3; Conference of 13th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2013 ; Conference Date: 3 December 2013 Through 6 December 2013; Conference Code:101875
ER  -