relation: https://khub.utp.edu.my/scholars/3714/ title: Evaluation of properties and FEM model of the friction welded mild steel-Al6061-alumina creator: Seli, H. creator: Awang, M. creator: Ismail, A.I.M. creator: Rachman, E. creator: Ahmad, Z.A. description: Evaluation of mechanical and interfacial properties of friction welded alumina-mild steel rods with the use of Al6061 sheet are presented in this work. SEM, EDX analysis, hardness and bending strength tests were conducted. The bonds were attained through interfacial interlocking and intermetalllic phase formation with average bending strengths in the range of 40 to 200 MPa and insignificant hardness change in the parent alumina and mild steel. A preliminary simulation was made to predict the deformation, stress, strain and temperature distribution during the joining operation using a fully coupled thermo-mechanical FE model. The aluminum alloy metal being rubbed was simulated using a phenomenological Johnson-Cook viscoplasticity material model, which suited for materials subjected to large strains, high strain rates and high temperatures. The highest stress, strain and deformation are found to be within the heat affected zone of the weld close to the periphery rubbing surface region and correspond to the highest temperature profiles observed. © 2013. date: 2013 type: Article type: PeerReviewed identifier: Seli, H. and Awang, M. and Ismail, A.I.M. and Rachman, E. and Ahmad, Z.A. (2013) Evaluation of properties and FEM model of the friction welded mild steel-Al6061-alumina. Materials Research, 16 (2). pp. 453-467. ISSN 15161439 relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84876271130&doi=10.1590%2fS1516-14392012005000178&partnerID=40&md5=0e352d41657fb5e925a8d11f01a3dd0a relation: 10.1590/S1516-14392012005000178 identifier: 10.1590/S1516-14392012005000178