eprintid: 3599 rev_number: 2 eprint_status: archive userid: 1 dir: disk0/00/00/35/99 datestamp: 2023-11-09 15:51:51 lastmod: 2023-11-09 15:51:51 status_changed: 2023-11-09 15:47:11 type: article metadata_visibility: show creators_name: Rahmanian, N. creators_name: Homayoonfard, M. creators_name: Alamdari, A. title: Simulation of urea prilling process: An industrial case study ispublished: pub keywords: Air temperature; Caking; Cooling air; Cross sectional area; Industrial case study; Operating condition; Plant data; Prilling; Simulation; Simultaneous solution; Thermal equations, Atmospheric temperature; Drop breakup; Industrial applications; Metabolism; Towers; Urea, Computer simulation note: cited By 21 abstract: A local industrial urea prilling tower with a rectangular cross-sectional area under the operating conditions of free convection was mathematically modeled. In this model the prilling process has been simulated by simultaneous solution of the continuity, hydrodynamic, and thermal equations. Temperature distributions of the particles and the cooling air along the height of the tower were calculated from the model. The air temperature profile predicted by the model was compared with the measured air temperature along the tower. The data predicted by the model were almost in agreement with the plant data, indicating the validity of the model. The result of this study suggests that an increase in heat transfer from the particles using installation of induced fans can reduce the temperature of produced prills and hence reduce caking tendency of the prilled urea. © 2013 Copyright Taylor and Francis Group, LLC. date: 2013 official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873669449&doi=10.1080%2f00986445.2012.722147&partnerID=40&md5=dc45803fbdb992d86e0f15b03139cf4d id_number: 10.1080/00986445.2012.722147 full_text_status: none publication: Chemical Engineering Communications volume: 200 number: 6 pagerange: 764-782 refereed: TRUE issn: 00986445 citation: Rahmanian, N. and Homayoonfard, M. and Alamdari, A. (2013) Simulation of urea prilling process: An industrial case study. Chemical Engineering Communications, 200 (6). pp. 764-782. ISSN 00986445