eprintid: 3559
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/35/59
datestamp: 2023-11-09 15:51:49
lastmod: 2023-11-09 15:51:49
status_changed: 2023-11-09 15:47:06
type: article
metadata_visibility: show
creators_name: Ghazanfar, B.
creators_name: Awang, M.
creators_name: Khan, S.R.
creators_name: Fawad, H.
title: Development of a new approach for incorporating tool tilting in friction stir welding
ispublished: pub
keywords: Friction stir welding(FSW); New approaches; Rotational speed; Tilt angle; Tool geometry; Traverse speed; Tunnel defects; Vertical milling, Defects; Friction stir welding; Milling machines; Welds, Tools
note: cited By 6; Conference of 2013 3rd International Conference on Key Engineering Materials, ICKEM 2013 ; Conference Date: 8 March 2013 Through 9 March 2013; Conference Code:97633
abstract: Friction Stir Welding (FSW) is a simple process involving a rotating tool (with an extended pin) traversing on the joining line of the two work pieces leaving behind the required weld. Tool geometry (pin and shoulder), rotational speed, traverse speed, and tilt angle are important parameters which determine the resultant properties of weld. Milling machines due to rotating tool and traversing can be used as a method of doing laboratory scale FSW experiment. In cases where milling machines have a fixed head, limitation of zero degree tool tilt angle results in substantial defects (e.g. tunnel defect) in weldments. In this study a new approach is developed and adopted for overcoming this limitation of a fixed head vertical milling machine to incorporate the flexibility of tool tilt. The results for welding with and without this approach are presented along with discussion and conclusion. © (2013) Trans Tech Publications, Switzerland.
date: 2013
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84879574434&doi=10.4028%2fwww.scientific.net%2fAMR.701.378&partnerID=40&md5=f168c19d2ad0d9a80bfcc6301f2bdaac
id_number: 10.4028/www.scientific.net/AMR.701.378
full_text_status: none
publication: Advanced Materials Research
volume: 701
place_of_pub: Kota Kinabalu
pagerange: 378-381
refereed: TRUE
isbn: 9783037857045
issn: 10226680
citation:   Ghazanfar, B. and Awang, M. and Khan, S.R. and Fawad, H.  (2013) Development of a new approach for incorporating tool tilting in friction stir welding.  Advanced Materials Research, 701.  pp. 378-381.  ISSN 10226680