TY  - CONF
CY  - Bandung
AV  - none
N2  - In this work, the hybrid treated layer on austenitic AISI 316L stainless steels were characterized to investigate the improvement on its surface properties. Characterization of this resulting layer was performed by FESEM (Field Emission Scanning Electron Microscope), USPM (Universal Scanning Probe Microscope) and nanoindentation. By using these methods, changes in the mechanical properties due to the diffusion of carbon and nitrogen at low temperature treatments have been traced. This hybrid treated sample has confirmed a considerable increase in hardness and a small rise in the elastic modulus compared to the untreated sample. It is found that all treated samples have enhance E/H ratio which exhibited the decreasing tendency to plastic deformation and reduced the mismatch of properties, while keeping deformation within the elastic range. © Published under licence by IOP Publishing Ltd.
N1  - cited By 5; Conference of 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2013 ; Conference Date: 9 March 2013 Through 10 March 2013; Conference Code:98301
TI  - Microstructure and nanoindentation characterization of low temperature hybrid treated layer on austenitic stainless steel
ID  - scholars3522
KW  - AISI316L stainless steel; Austenitic; Diffusion of carbons; Elastic ranges; Field emission scanning electron microscopes; Low temperature treatment; Low temperatures; Scanning probe microscope
KW  -  Austenitic stainless steel; Manufacture; Mechanical properties; Nanoindentation; Optimization
KW  -  Temperature
Y1  - 2013///
SN  - 17578981
A1  - Triwiyanto, A.
A1  - Hussain, P.
A1  - Ismail, M.C.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84881252959&doi=10.1088%2f1757-899X%2f46%2f1%2f012043&partnerID=40&md5=3b3c517bca7330bc5fed1b9232b133b8
VL  - 46
ER  -