eprintid: 3464
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/34/64
datestamp: 2023-11-09 15:51:43
lastmod: 2023-11-09 15:51:43
status_changed: 2023-11-09 15:46:53
type: conference_item
metadata_visibility: show
creators_name: Elshekh, A.E.A.
creators_name: Shafiq, N.
creators_name: Nuruddin, M.F.
creators_name: Fathi, A.
title: Mechanical properties of high strength concrete using fly ash
ispublished: pub
keywords: Advanced researches; Cement replacement; Concrete technology; High strength concretes; Higher strength concrete; optimum; Ultimate strain; workability, Bending strength; Compressive strength; Concrete mixers; High performance concrete; Industrial applications; Mechanical properties; Production, Fly ash
note: cited By 6; Conference of 2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013 ; Conference Date: 7 April 2013 Through 9 April 2013; Conference Code:98689
abstract: Recently, a number of researches have involved improving the concrete technology requirements through advanced research. These studies involved high strength concrete HSC, were highly dependent on the quality of ingredient-materials. HSC production potentially involves several trial mixes and uses high quantities of fine materials thus making it very costly and time consuming. The objectives of this study were to reduce the production cost, time required and to improve HSC properties by providing control mixes and using fly ash as partial cement replacement. This was done by experimentally investigating the HSC production using 10, 20 and 30 replacement of cement by fly ash and selecting the optimum replacement content. All concrete mixes were homogeneous in fresh concrete state, did not show any sign of segregation and maintains slump between 80-110mm. Fly ash addition further improved the workability. At the age 90 days, all concrete mixes achieved the cube compressive strength between 72 to 120MPa. Tensile and flexural strength were increased using fly ash using fly ash. Higher strength concrete showed low ductility because the ultimate strain was found less than 0.35, there was In general 20 fly ash content was found the optimum. © 2013 IEEE.
date: 2013
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84883127254&doi=10.1109%2fBEIAC.2013.6560137&partnerID=40&md5=43f66c736c5b117a08c0b11cbc3f00e7
id_number: 10.1109/BEIAC.2013.6560137
full_text_status: none
publication: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium
place_of_pub: Langkawi
pagerange: 306-310
refereed: TRUE
isbn: 9781467359689
citation:   Elshekh, A.E.A. and Shafiq, N. and Nuruddin, M.F. and Fathi, A.  (2013) Mechanical properties of high strength concrete using fly ash.  In: UNSPECIFIED.