eprintid: 3230
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/32/30
datestamp: 2023-11-09 15:51:29
lastmod: 2023-11-09 15:51:29
status_changed: 2023-11-09 15:45:16
type: article
metadata_visibility: show
creators_name: Mohideen, M.F.
creators_name: Md Seri, S.
creators_name: Raghavan, V.R.
title: Fluidization of Geldart Type-D particles in a swirling fluidized bed
ispublished: pub
keywords: Bed materials; Different sizes; Fluidization quality; Large sizes; Minimum fluidization; Minimum fluidization velocity; Poor fluidization; Superficial velocity, Aerospace engineering; Centrifugation; Fluidization; Hydrodynamics; Pressure drop; Tracking (position), Fluidized beds
note: cited By 10; Conference of 2nd International Conference on Mechanical and Aerospace Engineering, ICMAE 2011 ; Conference Date: 29 July 2011 Through 31 July 2011; Conference Code:87387
abstract: Geldart Type-D particles are often associated with poor fluidization characteristics due to their large sizes and higher densities. This paper reports the hydrodynamics of various Geldart Type-D particles when fluidized in a swirling fluidized bed (SFB). Four different sizes of particles ranging from 3.85 mm to 9.84 mm with respective densities ranging from 840 kg/m3 to 1200 kg/m3 were used as bed material to study the effect of various bed weights (500 gram to 2000 gram) and centre bodies (cone and cylinder) for superficial velocities up to 6 m/s. The performance of the SFB was assessed in terms of pressure drop values, minimum fluidization velocity, Umf and fluidization quality by physical observation on regimes of operation. The swirling fluidized bed showed excellent capability in fluidizing Geldart Type-D particles in contrast to the conventional fluidized beds. The bed pressure drop of increased with superficial velocity after minimum fluidization as a result of increasing centrifugal bed weight. It was also found that the particle size and centre body strongly influence the bed hydrodynamics. © (2012) Trans Tech Publications, Switzerland.
date: 2012
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-81255171960&doi=10.4028%2fwww.scientific.net%2fAMM.110-116.3720&partnerID=40&md5=1539c2b52b8f88d94182bdf7b669b1cb
id_number: 10.4028/www.scientific.net/AMM.110-116.3720
full_text_status: none
publication: Applied Mechanics and Materials
volume: 110-11
place_of_pub: Bangkok
pagerange: 3720-3727
refereed: TRUE
isbn: 9783037852620
issn: 16609336
citation:   Mohideen, M.F. and Md Seri, S. and Raghavan, V.R.  (2012) Fluidization of Geldart Type-D particles in a swirling fluidized bed.  Applied Mechanics and Materials, 110-11.  pp. 3720-3727.  ISSN 16609336