<> "The repository administrator has not yet configured an RDF license."^^ . <> . . . "Rheological behavior of carbon nanotubes/ copper feedstocks for metal injection molding"^^ . "Metal injection molding (MIM) technology is known for its ability of producing near net shape components. This study presents the results of flow behavior of multi-walled carbon nanotubes (MWCNTs) reinforced copper composites mixes. The solid loadings in the copper mixes were investigated in the ranges of 55-61 V using a binder. Copper mixes and copper/MWCNTs were compounded using a Z-blade mixer for homogenous dispersion of solids in the binder. Results identified a mix containing 59 V copper suitable for substitution of MWCNTs. The flow properties were measured using a capillary rheometer in the shear rate range expected to occur during metal injection molding. An increasing trend in viscosity of the copper mixes with powder loading was noted. Copper/MWCNTs composite mixes showed viscosity more than 1000 Pa.s perhaps due to addition of MWCNTs and increasing trend in viscosity of copper/MWECNTs was recorded. The results of flow data showed that all copper composite mix containing up to 10 Vol. MWCNTs were successfully injection molding and test samples were produced. © (2012) Trans Tech Publications, Switzerland."^^ . "2012" . . "403-40" . . "Advanced Materials Research"^^ . . . "10226680" . . . . . . . . . . . . . "A.S."^^ . "Muhsan"^^ . "A.S. Muhsan"^^ . . "F."^^ . "Ahmad"^^ . "F. Ahmad"^^ . . "M.R."^^ . "Raza"^^ . "M.R. Raza"^^ . . . . . "HTML Summary of #3219 \n\nRheological behavior of carbon nanotubes/ copper feedstocks for metal injection molding\n\n" . "text/html" . .