relation: https://khub.utp.edu.my/scholars/3191/ title: Microstructure and mechanical properties evaluations of heat treated dissimilar metal joint weldment between API 5CT C90 and ASTM A182 F22 creator: Awang, M. creator: Othman, M.H. creator: Shaari, K.Z.K. creator: Wichi, M.N. description: In this research, post-weld heat treatment (PWHT) of dissimilar API 5CT C90 and ASTM A182 F22 welded pipe was carried out at temperatures of 500, 600, 700 and 800°C. The effects of PWHT on the microstructure and mechanical properties of the weldment were investigated. The mechanical tests and microstructure examinations were focused on the fusion line area of API 5CT C90 as this area is the most crucial part of the weldment. The main objective of this research is to assess the microstructure and mechanical properties of the dissimilar weldment. The results were then compared with NACE MR0175/ISO15156 code which requires hardness values below 275 Hv10 at a cap, below 250 Hv10 at a root and an average value 42 Joules at -20°C for charpy impact test 1. The experimental results show that PWHT reduces the hardness value and increase the toughness of the weldment. Meanwhile, the optical microscopic examination shows that the higher the PWHT temperature, the coarser the grain size. The results showed that the 800°C PWHT specimen complied with the code. © (2012) Trans Tech Publications. publisher: Trans Tech Publications Ltd date: 2012 type: Article type: PeerReviewed identifier: Awang, M. and Othman, M.H. and Shaari, K.Z.K. and Wichi, M.N. (2012) Microstructure and mechanical properties evaluations of heat treated dissimilar metal joint weldment between API 5CT C90 and ASTM A182 F22. Defect and Diffusion Forum, 326-32. pp. 335-340. ISSN 10120386 relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84860804614&doi=10.4028%2fwww.scientific.net%2fDDF.326-328.335&partnerID=40&md5=91891b0c9c7acc7ccd0333093840df2b relation: 10.4028/www.scientific.net/DDF.326-328.335 identifier: 10.4028/www.scientific.net/DDF.326-328.335