eprintid: 3152
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/31/52
datestamp: 2023-11-09 15:51:25
lastmod: 2023-11-09 15:51:25
status_changed: 2023-11-09 15:45:06
type: article
metadata_visibility: show
creators_name: Bakhit, A.A.
creators_name: Wong, P.W.
title: A novel single and dual-band miniaturized matched band-stop filter using stepped impedance resonator
ispublished: pub
note: cited By 16
abstract: In this paper in order to reduce the size and improve the performance of microwave filter, novel single and dual band matched band-stop filters are developed. A stepped impedance dual mode resonator is used, resulting in a much more compact size, than the conventional dual mode ring resonator that has an electrical length of 360°. The proposed prototype is able to achieve high stop band attenuation even with low Q factor values. Moreover, for the short electrical length of this filter, the first spurious resonance occurs at 4.7 times the fundamental resonance frequency. Therefore, the proposed technique selectively removes only the fundamental resonance frequency when such a resonator is implemented. A theoretical analysis, along with an experimental prototype is proposed in order to demonstrate the feasibility of these proposed networks.
date: 2012
publisher: Electromagnetics Academy
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84868023566&doi=10.2528%2fPIERC12091602&partnerID=40&md5=ab53675e04fe9cf0f48120601a77f9c2
id_number: 10.2528/PIERC12091602
full_text_status: none
publication: Progress In Electromagnetics Research C
volume: 33
pagerange: 229-241
refereed: TRUE
issn: 19378718
citation:   Bakhit, A.A. and Wong, P.W.  (2012) A novel single and dual-band miniaturized matched band-stop filter using stepped impedance resonator.  Progress In Electromagnetics Research C, 33.  pp. 229-241.  ISSN 19378718