relation: https://khub.utp.edu.my/scholars/2656/
title: Prediction of contact temperature on interaction between rail and wheel materials using pin-on-disc method
creator: Windarta
creator: Bin Sudin, M.
creator: Baharom, M.B.
description: The interaction between rail and wheel materials produce wear damage on each surface and frictional heat. This study is aimed to predict contact temperature due to the interaction between rail and wheel for various applied load and velocity. The frictional heat was modeled as a solid contact pressure. The temperature rise was calculated by numerically integrating the equation using Adomian Decomposition Method. The paper also studies the influences of sliding speed on temperature rise. The pin-on-disc experiment was used to validate the results. The results show the peak pressure distributions increase linearly with the increasing applied load with an average slope of 0.053. The maximum temperature rise was 259.98 K at x = 1 mm for 5.3 MPa pressure and 3.14 m sec-1 sliding speed. Prediction temperature rise results were successfully validated using pin-on-disc method. The average error between prediction and measurement results was 4.99. © 2012 Asian Network for Scientific Information.
date: 2012
type: Article
type: PeerReviewed
identifier:   Windarta and Bin Sudin, M. and Baharom, M.B.  (2012) Prediction of contact temperature on interaction between rail and wheel materials using pin-on-disc method.  Journal of Applied Sciences, 12 (23).  pp. 2424-2429.  ISSN 18125654     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84872038937&doi=10.3923%2fjas.2012.2424.2429&partnerID=40&md5=9363c3b6c584f8de482c38cdf64f4e36
relation: 10.3923/jas.2012.2424.2429
identifier: 10.3923/jas.2012.2424.2429