eprintid: 2629
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/26/29
datestamp: 2023-11-09 15:50:52
lastmod: 2023-11-09 15:50:52
status_changed: 2023-11-09 15:43:56
type: article
metadata_visibility: show
creators_name: Venkiteswaran, V.K.
creators_name: Jun, G.J.
creators_name: Sing, C.Y.
creators_name: Sulaiman, S.A.
creators_name: Raghavan, V.R.
title: Variation of bed pressure drop with particle shapes in a swirling fluidized bed
ispublished: pub
keywords: Different shapes; Incipient fluidization; Overlap angle; Particle shape; Physical parameters; Pumping power; Shaped particles; Superficial velocity; Surface area; Work study, Fluidization; Fluidized beds, Pressure drop
note: cited By 13
abstract: In fluidized bed processes, bed pressure drop is crucial as it determines the pumping power required. However, the physical parameters that influence the bed pressure drop are yet to be fully established. The present work studies the effect of particle shape on bed pressure drop in a swirling fluidized bed. The three different shapes of particle used in the work are; cylindrical, spherical and ellipsoidal, with different bed weights (0.5, 0.75 and 1.0 kg). Blades with overlap angle of 9° and blade inclination of 10° were used in this experiment. The results showed an increase in the bed pressure drop with an increase in bed weight for all three particles regardless of shape. Spherical shaped particles were seen to have the highest pressure drop compared to the others due to a smaller exposed surface area. When the data acquired in the work was plotted a hysteresis loop was observed which was due to the extra energy required for the rearrangement or unlocking of particle at incipient fluidization. © 2012 Asian Network for Scientific Information.
date: 2012
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84872357491&doi=10.3923%2fjas.2012.2598.2603&partnerID=40&md5=d5c1e283fab7ef7f853f399524a7f1c4
id_number: 10.3923/jas.2012.2598.2603
full_text_status: none
publication: Journal of Applied Sciences
volume: 12
number: 24
pagerange: 2598-2603
refereed: TRUE
issn: 18125654
citation:   Venkiteswaran, V.K. and Jun, G.J. and Sing, C.Y. and Sulaiman, S.A. and Raghavan, V.R.  (2012) Variation of bed pressure drop with particle shapes in a swirling fluidized bed.  Journal of Applied Sciences, 12 (24).  pp. 2598-2603.  ISSN 18125654