eprintid: 2604
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/26/04
datestamp: 2023-11-09 15:50:50
lastmod: 2023-11-09 15:50:50
status_changed: 2023-11-09 15:43:53
type: conference_item
metadata_visibility: show
creators_name: Ahmad, N.F.
creators_name: Yahaya, N.Z.
title: Load parameter optimization of SRBC circuit using fixed PWM signals
ispublished: pub
keywords: Buck converters; Circuit operation; Current ripples; Data sheets; High frequency; Load parameters; Optimized parameter; Output parameters; Output voltages; Parameter optimization; Pspice software; Simulation circuits, Computer software; Electric network analysis; Electric rectifiers; Low power electronics; Optimization, SPICE
note: cited By 0; Conference of 3rd IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, STUDENT 2012 ; Conference Date: 6 October 2012 Through 9 October 2012; Conference Code:95586
abstract: This work is about the study and evaluation of the output parameters on SRBC circuit based on the optimized values of inductor, L, capacitor, C and resistor, R. The development of low power converters in future must have the capability to operate in megahertz switching frequency. This project will be based on simulation circuit using PSPICE software. The simulation will involve the study of the data sheet, circuit operation and the fundamental of SRBC circuit. Then, the results will be evaluated in terms of its output voltage and current. In addition, the voltage and current ripples which contribute to losses are also taken into consideration. It is found that the optimized parameter values for CCM are L = 15 μH, C = 0.625 μF and R = 3.5 � and whilst for DCM, L = 1 μH, C = 9.375 μF and R = 4 �. © 2012 IEEE.
date: 2012
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873958755&doi=10.1109%2fSTUDENT.2012.6408353&partnerID=40&md5=288fc4baccfe8ffba8a05cc6b3ff4cdd
id_number: 10.1109/STUDENT.2012.6408353
full_text_status: none
publication: 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, STUDENT 2012 - Conference Booklet
place_of_pub: Kuala Lumpur
pagerange: 13-17
refereed: TRUE
isbn: 9781467317054
citation:   Ahmad, N.F. and Yahaya, N.Z.  (2012) Load parameter optimization of SRBC circuit using fixed PWM signals.  In: UNSPECIFIED.