eprintid: 2593
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/25/93
datestamp: 2023-11-09 15:50:49
lastmod: 2023-11-09 15:50:49
status_changed: 2023-11-09 15:43:51
type: conference_item
metadata_visibility: show
creators_name: Soriadi, N.
creators_name: Mohamed, N.M.
creators_name: Hussin, F.A.
title: A review of TiO2 nanotube arrays for hydrogen sensing application
ispublished: pub
note: cited By 2; Conference of 2nd International Conference on Fundamental and Applied Sciences 2012, ICFAS 2012 ; Conference Date: 12 June 2012 Through 14 June 2012
abstract: Titania nanotube arrays presented high sensitivity to hydrogen gas. Highly order the Titania Nanotube arrays were fabricated by anodization process then annealed at temperature 500°C. Nanotubes produced was found to have pore size ranging from 38 nm to 48 nm for inner diameter, 57 nm to 73 nm for outer diameter with applied anodization voltage of 10 V, 12 V and 15 V. Titania nanotube film was then integrated into a sensor configuration and tested for its sensing properties. The sample of titania nanotube with the smallest pore size was found to exhibit the highest sensitivity for detection of hydrogen with concentration as low as 10 ppm. The nanotube morphology then analyzed by field emission scanning electron microscopy (SEM) and X-ray diffraction (XRD). © 2012 American Institute of Physics.
date: 2012
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84874124437&doi=10.1063%2f1.4757544&partnerID=40&md5=e7200e55ea7b2361376f6d34e23dfef6
id_number: 10.1063/1.4757544
full_text_status: none
publication: AIP Conference Proceedings
volume: 1482
place_of_pub: Kuala Lumpur
pagerange: 611-616
refereed: TRUE
isbn: 9780735410947
issn: 0094243X
citation:   Soriadi, N. and Mohamed, N.M. and Hussin, F.A.  (2012) A review of TiO2 nanotube arrays for hydrogen sensing application.  In: UNSPECIFIED.