TY  - CONF
VL  - 1440
SP  - 436
AV  - none
ID  - scholars2501
N1  - cited By 1; Conference of 4th International Meeting of Advances in Thermofluids, IMAT 2011 ; Conference Date: 3 October 2011 Through 4 October 2011
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-84874452554&doi=10.1063%2f1.4704247&partnerID=40&md5=e200ca7e3be26f92c47d4991cca7b9ee
A1  - Ali, Y.
A1  - Shamsudeen, A.
A1  - Abdullah, S.
A1  - Aziz, A.R.A.
EP  - 443
CY  - Melaka
SN  - 0094243X
N2  - A study was carried out on the new design of fuel injectors for Compressed Natural Gas Direct Injection (CNGDI) engine. There are two injectors designed with 30° and 70° spray angle was developed and tested. The tests on the injectors were carried out using Single Cylinder Research Engine SCRE with compression ratio of 14:1. The SCRE test bed used computerized data acquisition system. There are two main parameters for the selection of the best injector i.e. the spray angle (30° and 70°) and the operating pressure is set at 2.0 MPa. From the study, the engine performance and the emission were recorded from the test. The results indicated that the injector with 70° spray angle achieved higher performance than the other injector. © 2012 American Institute of Physics.
TI  - The effect of spray angles of the injector on the power of compressed natural gas direct injection (CNGDI) engine
Y1  - 2012///
ER  -