TY  - JOUR
EP  - 77
SN  - 09204105
N1  - cited By 4
SP  - 69
TI  - Design and analysis of single pulse tests
AV  - none
A1  - El-Khatib, N.
JF  - Journal of Petroleum Science and Engineering
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-79952493602&doi=10.1016%2fj.petrol.2011.02.010&partnerID=40&md5=e8999a31ebc3a527112b59c7d74c5f7f
VL  - 77
Y1  - 2011///
N2  - A procedure is developed for the design and analysis of single pulse tests. A new definition is adopted for the pressure response amplitude that eliminates the effect of pressure trend. The method is applicable for homogeneous reservoirs with negligible well bore storage and skin at both wells. The test may be performed in an interactive way. Analytical equations are derived that explicitly relate the dimensionless pulse time and dimensionless pressure response amplitude to the time lag ratio. This makes it possible to analyze the results automatically by a computer. Correlation charts are also presented for graphical analysis of test results. The charts are independent of the pulse ratio since it is not a parameter in the developed analytical equations. The time and pressure response amplitude are used to calculate the inter-well transmissibility kh/μ and storativity hΦct using graphical or analytical procedures. The effect of past production is also investigated. Past production is found to increase the estimated value of transmissibility but has little effect on the value of storativity. © 2011 Elsevier B.V.
IS  - 1
ID  - scholars2218
KW  - Interference testing; Lag-time; Pressure response amplitude; Pulse testing; Single pulse tests; Storativity; Transmissibility
KW  -  Testing
KW  -  Pressure effects
KW  -  analytical method; design method; graphical method; hydrocarbon reservoir; pressure field; well testing
ER  -