eprintid: 2154
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/21/54
datestamp: 2023-11-09 15:50:21
lastmod: 2023-11-09 15:50:21
status_changed: 2023-11-09 15:42:08
type: article
metadata_visibility: show
creators_name: Megat-Yusoff, P.S.M.
creators_name: Latif, M.R.A.
creators_name: Ramli, M.S.
title: Optimizing injection molding processing parameters for enhanced mechanical performance of oil palm empty fruit bunch high density polyethylene composites
ispublished: pub
note: cited By 15
abstract: This study reports on the influence of injection molding processing parameters on mechanical properties of oil palm Empty Fruit Bunch (EFB) filled High Density Poly Ethylene (HDPE). The biocomposite pellets were first prepared using an extruder with 20 wt EFB content before being processed in an injection-molding machine for specimen fabrication. Two processing parameters were varied systematically and independently during the composite sample fabrication. The holding pressure was increased from 60 to 90 bars while the injection temperature was varied from 150 to 210°C. The highest tensile strength of the composites was achieved at 70 bar holding pressure and 150°C injection temperature. However, the highest fracture strength was achieved at 80 bars whilst maintaining the injection temperature at 150°C. Flexural strength was shown to be unaffected by the varying pressure. The optimal processing parameters for highest mechanical performance were found to be at holding pressure of 80 bars and injection temperature of 150°C. Scanning Electron Microscopy (SEM) observation of the fractured surfaces revealed agglomeration of fibers which contributed to poor adhesion of the fibers to the matrix material. © 2011 Asian Network for Scientific Information.
date: 2011
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-79955552882&doi=10.3923%2fjas.2011.1618.1623&partnerID=40&md5=757feb95cc26b54f2eb95b830dbd93f1
id_number: 10.3923/jas.2011.1618.1623
full_text_status: none
publication: Journal of Applied Sciences
volume: 11
number: 9
pagerange: 1618-1623
refereed: TRUE
issn: 18125654
citation:   Megat-Yusoff, P.S.M. and Latif, M.R.A. and Ramli, M.S.  (2011) Optimizing injection molding processing parameters for enhanced mechanical performance of oil palm empty fruit bunch high density polyethylene composites.  Journal of Applied Sciences, 11 (9).  pp. 1618-1623.  ISSN 18125654