eprintid: 20606
rev_number: 3
eprint_status: archive
userid: 1
dir: disk0/00/02/06/06
datestamp: 2026-07-06 07:36:33
lastmod: 2026-07-06 07:36:33
status_changed: 2026-07-06 07:36:33
type: article
metadata_visibility: show
creators_name: Ghani, Jaharah A.
creators_name: Ismanizan, Muhammad Asyraf
creators_name: Rahman, Haniff Abdul
creators_name: Haron, Che Hassan Che
creators_name: Juri, Afifah Zakiyyah
creators_name: Kasim, Mohd. Shahir
creators_name: Rizal, Muhammad
title: Machining analysis of S45C carbon steel using finite element method
ispublished: pub
note: Cited by: 5
abstract: This study focuses on the application of the finite element method (FEM) in the machining of carbon steel bars S45C, which is widely used for producing machine structures, shafts, gears, and parts for actuators or sensors that commonly used in the automotive industry. The Abaqus CAE software has been utilized for the simulation study. The simulation was carried out according to the Taguchi L9 orthogonal array, with a cutting speed of 160 � 240 m/min, a feed rate of 0.1 � 0.4 mm/rev, and depth of cut of 0.15 � 0.35 mm. For comparison with the experiment, the parameters used in the industry were performed at a cutting speed of 200 m/min, a feed rate of 0.2 mm/rev, and depth of cut of 0.25 mm. The simulation results found that the optimal cutting parameters are at a cutting speed of 160 m/min, a depth of cut of 0.15 mm, and a feed rate of 0.1 mm/rev that resulted in minimum cutting force of 71 N, with the feed rate being the most significant factor followed by depth of cut and cutting speed. Therefore, it can be concluded that the simulation results can be considered in the machinability study of S45C material because this method saves the actual machining cost, and the results are reliable. © 2024, Malaysian Tribology Society (Mytribos). All rights reserved.
date: 2024
publisher: Malaysian Tribology Society (Mytribos)
official_url: https://www.scopus.com/pages/publications/85189627323?origin=resultslist
full_text_status: none
publication: Jurnal Tribologi
volume: 40
pagerange: 226 - 246
refereed: TRUE
issn: 22897232
citation:   Ghani, Jaharah A. and Ismanizan, Muhammad Asyraf and Rahman, Haniff Abdul and Haron, Che Hassan Che and Juri, Afifah Zakiyyah and Kasim, Mohd. Shahir and Rizal, Muhammad  (2024) Machining analysis of S45C carbon steel using finite element method.  Jurnal Tribologi, 40.  226 - 246.  ISSN 22897232