UTP ScholarsCryogenic Machining Performance of M303 at High Cutting SpeedsNur Fadhilah Aimuni MohdRidzuanauthorTahrinOthmanauthorAfifah ZakiyyahJuriauthorJaharah A.GhaniauthorChe Hassan CheHaronauthorThe material M303 is commonly used in the fabrication of machinery, automotive components, locomotive axle housings, and injection moulds. It is a stainless martensitic chromium steel known for its high strength, wear resistance, and corrosion resistance. The primary purpose of this study is to investigate the machinability of M303 under cryogenic conditions, specifically focusing on high cutting speeds. By exploring the effects of cryogenic machining on M303, the study aims to provide insights into the performance and characteristics of this material under extreme cutting conditions. This study investigates the influence of cutting parameters on the machinability of M303 in a cryogenic environment using liquid nitrogen (LN2) and coated carbide cutting tools in a high-speed turning process. The study focuses on high cutting speeds and examines essential machinability factors, including cutting forces, surface finish, and tool life. The experimental design utilises a Taguchi L4 orthogonal array to systematically study feed rates (0.1-0.2 mm/rev), depth of cut (0.2-0.6 mm), and high cutting speeds (260-340 m/min). Notably, at a low cutting speed of 260 m/min, coupled with low feed rates and depth of cut, the study reveals the longest tool life of 48.57 mintues was achieved. This condition is characterized by a good surface finish and low cutting forces with Ra of 0.9 µm and cutting force of 100 N respectively. The predominant wear occurs on the flank face, primarily due to fracturing and chipping, especially under high combinations of cutting parameters. Conversely, gradual wear is observed under low combinations of cutting parameters, resulting in an extended tool life. In conclusion, the application of LN2 proves effective under conditions of low cutting parameters. The study suggests that the risk of fracturing the cutting tool increases at higher feed rates and depths of cut, especially when combined with elevated cutting speeds. This research provides valuable insights into optimizing the machining of M303 for enhanced efficiency and tool longevity. © 2024, National University of Malaysia. All rights reserved.2024National University of MalaysiaArticle

For work being deposited by its own author: In self-archiving this collection of files and associated bibliographic metadata, I grant UTP Scholars the right to store them and to make them permanently available publicly for free on-line. I declare that this material is my own intellectual property and I understand that UTP Scholars does not assume any responsibility if there is any breach of copyright in distributing these files or metadata. (All authors are urged to prominently assert their copyright on the title page of their work.)

For work being deposited by someone other than its author: I hereby declare that the collection of files and associated bibliographic metadata that I am archiving at UTP Scholars is in the public domain. If this is not the case, I accept full responsibility for any breach of copyright that distributing these files or metadata may entail.

Clicking on the Deposit Item Now button indicates your agreement to these terms.