eprintid: 19898
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/98/98
datestamp: 2024-06-04 14:19:38
lastmod: 2024-06-04 14:19:38
status_changed: 2024-06-04 14:16:09
type: article
metadata_visibility: show
creators_name: Khan, J.A.
creators_name: Kim, J.
creators_name: Irawan, S.
creators_name: Permatasar, K.A.
creators_name: Verdin, P.G.
creators_name: Cai, B.
creators_name: Yekeen, N.
title: Application of foam assisted water-alternating-gas flooding and quantification of resistivity and water saturation by experiment and simulation to determine foam propagation in sandstone
ispublished: pub
note: cited By 1
abstract: Foam flooding by Foam Assisted Water-Alternating-Gas (FAWAG) is an important enhanced oil recovery method that has proven successful in experimental and pilot studies. The present study is carried out to monitor the movement of the foam front once injected into the porous medium. This study aims to investigate applications of resistivity waves to monitor foam propagation in a sandstone formation. In the present lab-scale experiments and simulations, resistivity measurements were carried out to monitor the progression of foam in a sand pack, and the relationships between foam injection time and resistivity, as well as brine saturation, were studied. The brine saturation from foam simulation using CMG STAR is exported to COMSOL and calculated true formation resistivity. A diagram was produced summarizing the progression of foam through the sand pack in the function of time, which enabled us to establish how foam progressed through a porous medium. A surfactant and brine mixture was injected into the sand pack, followed by nitrogen gas to generate the foam in situ. As foam progressed through the sand pack, resistance measurements were taken in three zones of the sand pack. The resistance was then converted into resistivity and finally into brine saturation. As foam travels through the sand pack, it is predicted to displace the brine initially in place. This gradually increases each zone's resistivity (decreases the brine saturation) by displacing the brine. Also, an increase in the surfactant concentration results in higher resistivity. Finally, a comparison of three different surfactant concentrations was evaluated in terms of resistivity results, water saturation, and foam propagation monitoring to obtain the optimum surfactant concentration involved in foam flooding. © 2024 The Authors
date: 2024
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85185161061&doi=10.1016%2fj.heliyon.2024.e25435&partnerID=40&md5=a9bd23fba09a880b94f6fc9dbdf3eef6
id_number: 10.1016/j.heliyon.2024.e25435
full_text_status: none
publication: Heliyon
volume: 10
number: 3
refereed: TRUE
citation:   Khan, J.A. and Kim, J. and Irawan, S. and Permatasar, K.A. and Verdin, P.G. and Cai, B. and Yekeen, N.  (2024) Application of foam assisted water-alternating-gas flooding and quantification of resistivity and water saturation by experiment and simulation to determine foam propagation in sandstone.  Heliyon, 10 (3).