eprintid: 19502
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/95/02
datestamp: 2024-06-04 14:11:58
lastmod: 2024-06-04 14:11:58
status_changed: 2024-06-04 14:05:51
type: article
metadata_visibility: show
creators_name: Azeem, M.
creators_name: Haji Ya, H.
creators_name: Azad Alam, M.
creators_name: Sadique, M.R.
creators_name: Mustapha, M.B.
creators_name: Akmar Bin Mokhtar, A.
creators_name: Ahmed, T.
creators_name: Sultan, M.T.H.
creators_name: Khan, R.
title: Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage
ispublished: pub
keywords: ABAQUS; Alloy steel; Compressed natural gas; Cylinders (shapes); Finite element method; Natural gas vehicles; Yield stress, Comparatives studies; Cylinder materials; High-pressure storage; Internal pressures; Metal cylinders; Natural gas storage; Service factors; Service safeties; Test pressure; VonMises stress, Pressure vessels
note: cited By 1; Conference of 7th International Conference on Production, Energy and Reliability, ICPER 2020 ; Conference Date: 14 July 2020 Through 16 July 2020; Conference Code:284729
abstract: In the present paper, the growth of Natural Gas Vehicles (NGVs) and the various pressure vessels used for storing compressed natural gas (CNG) is discussed.Also, the comparison of Von-mises stress in pressure vessels (PVs) due to internal pressure with different materials has been investigated numerically.Substantial use of natural gas is recorded as an alternative fuel, and the high-pressure storage of natural gas has resulted in using various types of cylinders in automobiles.Metal cylinders are extensively used in NGVs and are fabricated with different materials to satisfy services, safety and related factors.Metals and their alloys are often employed to make type I cylinders.It is important to calculate the failure pressure limit for a particular geometry of the tank against the yield strength of the material in case of metallic cylinders. An axisymmetric finite element model was made using the ABAQUS finite element platform to mimic the stress levels for two materials, viz steel alloy, and an aluminium alloy.The internal test pressure and geometric details of the cylinder were kept constant.The yield stress of material and numerical results have been compared.It was found that the steel alloy has outperformed the aluminium alloy for the given thickness of the cylinder.In contrast, the aluminium alloy failed to sustain the test pressure of 25 MPa. © 2023, Institute of Technology PETRONAS Sdn Bhd.
date: 2023
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140740485&doi=10.1007%2f978-981-19-1939-8_54&partnerID=40&md5=b89d0c311a4857a872f28c9fd49db964
id_number: 10.1007/978-981-19-1939-8₅₄
full_text_status: none
publication: Lecture Notes in Mechanical Engineering
pagerange: 689-704
refereed: TRUE
citation:   Azeem, M. and Haji Ya, H. and Azad Alam, M. and Sadique, M.R. and Mustapha, M.B. and Akmar Bin Mokhtar, A. and Ahmed, T. and Sultan, M.T.H. and Khan, R.  (2023) Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage.  Lecture Notes in Mechanical Engineering.  pp. 689-704.