eprintid: 1918
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/19/18
datestamp: 2023-11-09 15:50:05
lastmod: 2023-11-09 15:50:05
status_changed: 2023-11-09 15:41:37
type: article
metadata_visibility: show
creators_name: Sutjipto, A.G.E.
creators_name: Triwiyanto, A.
creators_name: Aminanda, Y.
creators_name: Faris, W.F.
creators_name: Adesta, E.Y.T.
title: Visual inspection on premature failure of electric motor bearings
ispublished: pub
keywords: Bearing clearance; Electric erosion; Electrical motors; Premature failures; Visual inspection, Electric locomotives; Electric motors; Inspection; Manufacture; Roller bearings, Electric generators
note: cited By 0; Conference of International Conference on Green Power, Materials and Manufacturing Technology and Applications, GPMMTA2011 ; Conference Date: 15 July 2011 Through 18 July 2011; Conference Code:86279
abstract: All electrical motor or generator bearings can potential suffers from electric erosion. Unfortunately, problems can start after just a few months of running a new electric motor or generator. From visual inspection, it was found that the failure happened on the raceway surface in equal spacing. There may be many reasons for this - heavier loading than has been anticipated, inadequate or unsuitable lubrication, careless handling, ineffective sealing, or fits that are too tight, with resultant insufficient internal bearing clearance. Each of these factors produces its own particular type of damage and leaves its own special imprint on the bearing. Consequently, by examining a damaged bearing such as visual inspection, it is possible, in the majority of cases, to form an opinion on the cause of the damage and to take the requisite action to prevent a recurrence. © (2011) Trans Tech Publications.
date: 2011
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-80052177399&doi=10.4028%2fwww.scientific.net%2fAMM.84-85.557&partnerID=40&md5=143749315ed6400b71a81e40b7b1a6a8
id_number: 10.4028/www.scientific.net/AMM.84-85.557
full_text_status: none
publication: Applied Mechanics and Materials
volume: 84-85
place_of_pub: Chongqing
pagerange: 557-561
refereed: TRUE
isbn: 9783037852248
issn: 16609336
citation:   Sutjipto, A.G.E. and Triwiyanto, A. and Aminanda, Y. and Faris, W.F. and Adesta, E.Y.T.  (2011) Visual inspection on premature failure of electric motor bearings.  Applied Mechanics and Materials, 84-85.  pp. 557-561.  ISSN 16609336