relation: https://khub.utp.edu.my/scholars/18308/
title: Oxidative extractive desulfurization system for fuel oil using acidic eutectic-based ionic liquid
creator: Rajasuriyan, S.
creator: Zaid, H.F.M.
creator: Majid, M.F.
creator: Ramli, R.M.
creator: Wei, L.J.
description: The removal of sulfur compounds from fuel are one of the biggest challenges faced by the oil re-fineries. It is important to remove sulfur compounds from fuel oil due to its environmental effects. These sulfur compounds release harmful sulfur oxide gas (SOx) when combusted in reaction with oxygen into the atmosphere. The conventional method for sulfur removal in the oil refineries is known as Hydrodesulfurization (HDS). Unfortunately, HDS requires operating conditions like high temperature and pressure for its process. Furthermore, this process is less effective in re-moving the organosulfur compounds present in fuel oil. This research focuses on a combination of EDS and ODS method using an oxidant, a photocatalyst to speed up the reaction, and eutectic-based ionic liquid (EIL) as the solvent. The photocatalyst used is a pre-reported catalyst, Cu-Fe/TiO2 and the EIL was synthesised by mixing choline chloride (ChCl) and alcohols. The alcohols used were butanediols with different positions of hydroxyl (OH) group, namely 1,2-butanediol, 1,3-butanediol and 1,4-butandiol. From the characterization analysis, ChCl:1,4-butanediol was observed as the ideal EIL based on its high density and viscosity. Further evaluation on the EIL for desulfurization process was carried out in a photo-reactor in the presence of photocatalyst Cu-Fe/TiO2 and H2O2. To measure the sulfur removal efficiency, the oil phase was analysed with HPLC. The optimum ratio of H2O2 to DBT and mass of catalyst for the reaction is found to be 2 and 0.010 g, respectively with ChCl-1,2-B as the ideal EIL. The ratio of 1:2 was obtained for the best ratio of model oil to EIL with 300 rpm as the optimum stirring speed. Thus, the highest removal efficiency of sulfur compound achieved was 78.9. © 2023 Author(s).
date: 2023
type: Conference or Workshop Item
type: PeerReviewed
identifier:   Rajasuriyan, S. and Zaid, H.F.M. and Majid, M.F. and Ramli, R.M. and Wei, L.J.  (2023) Oxidative extractive desulfurization system for fuel oil using acidic eutectic-based ionic liquid.  In: UNSPECIFIED.     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85176771649&doi=10.1063%2f5.0123311&partnerID=40&md5=2ec6a7876d9155c3dd8cbd4f62ef0040
relation: 10.1063/5.0123311
identifier: 10.1063/5.0123311