relation: https://khub.utp.edu.my/scholars/18046/
title: Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic�reinforced thermoplastic composites as floor tiles
creator: Soni, A.
creator: Das, P.K.
creator: Yusuf, M.
creator: Pasha, A.A.
creator: Irshad, K.
creator: Bourchak, M.
description: The usage of waste for the development of sustainable building materials has received an increasing attention in socio-eco-environment spheres. The rice husk ash (RHA) produced during burning of rice husk and the ever-increasing plastic wastes are useless causing detrimental effects on the environment. This research supports the idea of sustainability and circular economy via utilization of waste to produce value-added products. This research explores the potential of waste plastics, RHA, and silica sand as thermoplastic composite materials. The different composite samples were prepared through waste plastics which includes low- and high-density polyethylene and polypropylene with incorporation of RHA and silica sand in proportions. The study investigates the effect of filler/polymer in 30/70, 20/80, and 10/90 (wt. ) on the workability of the developed composite materials. The workability of the composites was found to improve with filler reinforcement. The experimental results showed the maximum density of 1.676 g/cm3 and mechanical strength of 26.39, 4.89, and 3.25 MPa as compressive, flexural, and tensile strengths, respectively. The minimum percentage of water absorption was 0.052. The wear tests resulted in a minimum abrasive and sliding wear rate of 0.03759 (cm3) and 0.00692 � 10�6 kg/m. The correlations between wear mechanisms and responses were morphologically analyzed. The developed composites verify the feasibility of RHA and plastics waste as a cost effective and environmentally competent product. The results and discussions provided a direction for the future research on sustainable polymeric composite materials. Graphical abstract: Figure not available: see fulltext. © 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
date: 2023
type: Article
type: PeerReviewed
identifier:   Soni, A. and Das, P.K. and Yusuf, M. and Pasha, A.A. and Irshad, K. and Bourchak, M.  (2023) Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic�reinforced thermoplastic composites as floor tiles.  Environmental Science and Pollution Research, 30 (60).  pp. 124566-124584.      
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85130358894&doi=10.1007%2fs11356-022-20915-6&partnerID=40&md5=0f7d46e68debcec919161eee2f428b57
relation: 10.1007/s11356-022-20915-6
identifier: 10.1007/s11356-022-20915-6