@article{scholars18046,
          number = {60},
            note = {cited By 11},
          volume = {30},
             doi = {10.1007/s11356-022-20915-6},
           title = {Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic{\^a}??reinforced thermoplastic composites as floor tiles},
            year = {2023},
         journal = {Environmental Science and Pollution Research},
           pages = {124566--124584},
        abstract = {The usage of waste for the development of sustainable building materials has received an increasing attention in socio-eco-environment spheres. The rice husk ash (RHA) produced during burning of rice husk and the ever-increasing plastic wastes are useless causing detrimental effects on the environment. This research supports the idea of sustainability and circular economy via utilization of waste to produce value-added products. This research explores the potential of waste plastics, RHA, and silica sand as thermoplastic composite materials. The different composite samples were prepared through waste plastics which includes low- and high-density polyethylene and polypropylene with incorporation of RHA and silica sand in proportions. The study investigates the effect of filler/polymer in 30/70, 20/80, and 10/90 (wt. ) on the workability of the developed composite materials. The workability of the composites was found to improve with filler reinforcement. The experimental results showed the maximum density of 1.676{\^A} g/cm3 and mechanical strength of 26.39, 4.89, and 3.25{\^A} MPa as compressive, flexural, and tensile strengths, respectively. The minimum percentage of water absorption was 0.052. The wear tests resulted in a minimum abrasive and sliding wear rate of 0.03759 (cm3) and 0.00692 {\~A}? 10{\^a}??6{\^A} kg/m. The correlations between wear mechanisms and responses were morphologically analyzed. The developed composites verify the feasibility of RHA and plastics waste as a cost effective and environmentally competent product. The results and discussions provided a direction for the future research on sustainable polymeric composite materials. Graphical abstract: Figure not available: see fulltext. {\^A}{\copyright} 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.},
             url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85130358894&doi=10.1007\%2fs11356-022-20915-6&partnerID=40&md5=0f7d46e68debcec919161eee2f428b57},
        keywords = {polyethylene; polypropylene; silicon dioxide, Oryza; sand, Oryza; Polyethylene; Polypropylenes; Sand; Silicon Dioxide},
          author = {Soni, A. and Das, P. K. and Yusuf, M. and Pasha, A. A. and Irshad, K. and Bourchak, M.}
}