TY - JOUR UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85126205509&doi=10.1007%2f978-3-030-93250-3_2&partnerID=40&md5=3d63985f28c8280a6af44226e83291a9 N1 - cited By 0 A1 - Zamzuri, A.N.A. A1 - Razak, M.A.â??H.A. A1 - Abdullah, A. A1 - Ab Kadir, A.R. A1 - Abdul-Rani, A.M. A1 - Azam, F.I. A1 - Zaharin, H.A. ID - scholars17737 EP - 22 N2 - In this research, the effect of electrical discharge machining (EDM) parameters such as pulse-on time (Ton), pulse-off time (Toff), voltage, (V), and current (I) on the material removal rate (MRR) in 304 stainless steel was studied. The experiments are carried out as per design of experiments approach using the L9 orthogonal array. From this study, it is found that different combinations of EDM process parameters are required to achieved higher MRR for 304. The contribution of each cutting parameters towards the MRR is also identified. The results from this study will be useful for manufacturing engineers to select appropriate EDM process parameters to machine stainless steel 304. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG. SN - 18698433 Y1 - 2022/// TI - Potential Experimental Analysis of Electrical Discharge Machine Process Parameters on Stainless Steel ANSI 304 VL - 169 SP - 15 PB - Springer Science and Business Media Deutschland GmbH JF - Advanced Structured Materials AV - none ER -