%0 Journal Article
%@ 12696935
%A Jamil, A.
%A Baharom, M.B.
%A Abd Aziz, A.R.B.
%D 2022
%F scholars:16882
%I International Information and Engineering Technology Association
%J Journal Europeen des Systemes Automatises
%N 2
%P 229-236
%R 10.18280/jesa.550210
%T In-Cylinder Cold-Flow Analysis - �A Comparison of Crank-Slider Engine and Crank-Rocker Engine�
%U https://khub.utp.edu.my/scholars/16882/
%V 55
%X Researchers and engineers are continuously working to improve the overall efficiency of internal combustion engines by modifying the engine designs and configurations. As new engine designs are introduced, the in-cylinder flow behaviour becomes more and more complex. The maximum output and efficiency that can be achieved from a single cylinder engine depends upon the amount of air entrapped in the combustion chamber during intake stroke. A novel crank-rocker (C-R) engine was designed and fabricated in Universiti Teknologi PETRONAS (UTP), Malaysia and is currently under optimization phase. This paper narrates the in-cylinder cold-flow analysis of the C-R engine considering widely used industrial automotive software, Converge CFD. The turbulent behaviour of the C-R engine was compared with that of the conventional crank-slider engine. The initial and boundary conditions for the C-R engine simulations were set according to the benchmarked crank-slider engine. RNG k-ε turbulence model was used to generate the data plots for tumble & swirl ratios, cylinder pressure, TKE, turbulent dynamic viscosity and vorticity at cold-flow conditions. It was observed that the C-R engine has better air scavenging properties and can achieve better air-fuel mixing that can lead to emission-free combustion. This study will help in understanding the turbulent airflow behaviour within the curved cylinder under the influence of rocking piston motion, and its advantageous flow properties compared to those in crank-slider engines. © 2022 Lavoisier. All rights reserved.
%Z cited By 1