eprintid: 16380
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/63/80
datestamp: 2023-12-19 03:22:54
lastmod: 2023-12-19 03:22:54
status_changed: 2023-12-19 03:06:08
type: article
metadata_visibility: show
creators_name: Malik, K.
creators_name: Ahmad, F.
creators_name: Keong, W.T.
creators_name: Gunister, E.
title: The effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites
ispublished: pub
keywords: Analysis of variance (ANOVA); Fiber reinforced plastics; Glass fibers; Infill drilling, ANOVA/RSM; Drilling parameters; Drilling performance; Drilling process; Drilling, drilling property; Glass-fiber reinforced polymer composites; Glassfiber reinforced polymers (GFRP); Polymer composite; Property; Thrust forces, Carbides
note: cited By 5
abstract: This paper presents an investigation of the drilling performance of glass fiber reinforced polymer (GFRP) composite based on the thrust force, temperature, and delamination factor (at entry and exit of the hole). High-speed steel (HSS), solid carbide (SC), and solid carbide Balinit® Helica coated (SCBH) twist tools were used for the drilling process. Other drilling parameters were high spindle speeds (12,000, 15,000, and 18,000 rpm), feed rate (300, 500, and 700 mm/min), and laminate thickness (3, 5, and 7 mm). ANOVA and response surface methodology were developed to examine the drilling process based on input and output parameters. Results showed that delamination was observed in the form of matrix debonding, uncut fibers, and fiber pull-out. The best drilling performance was achieved by the SC and SCBH tool at a low feed rate (300 rpm) and high speed (18,000 rpm), and high laminate thickness (7 mm). © The Author(s) 2022.
date: 2022
publisher: SAGE Publications Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85139010077&doi=10.1177%2f09673911221131113&partnerID=40&md5=f62b086c9fb153a099a7080e1fdc963e
id_number: 10.1177/09673911221131113
full_text_status: none
publication: Polymers and Polymer Composites
volume: 30
refereed: TRUE
issn: 09673911
citation:   Malik, K. and Ahmad, F. and Keong, W.T. and Gunister, E.  (2022) The effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites.  Polymers and Polymer Composites, 30.   ISSN 09673911