eprintid: 16085
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/60/85
datestamp: 2023-12-19 03:22:39
lastmod: 2023-12-19 03:22:39
status_changed: 2023-12-19 03:05:37
type: article
metadata_visibility: show
creators_name: Ador, M.S.H.
creators_name: Kabir, S.
creators_name: Ahmed, F.
creators_name: Ahmad, F.
creators_name: Adil, S.
title: Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid
ispublished: pub
note: cited By 5
abstract: This work aims to investigate and assess the beneficial function and feasibility of nanofluids in minimum quantity lubrication (MQL) assisted machining. The goal is to develop newly generated CNT based nano hybrid cutting fluid and demonstrate its effect on surface roughness of Al alloy. Moreover, the fabricated nano hybrid cutting fluid will eventually reduce cutting fluid consumptions and maintain an eco-friendly environment. Three conditions were used to perform the machining process such as dry condition, conventional oil and Al2O3/CNT nanoparticle with EVO oil as base fluid. The lowest surface roughness achieved for nanofluid and the maximum surface roughness for the dry condition. In terms of looking for optimum parametric combination, Artificial Neural Network (ANN) and Response Surface Methodology (RSM) have been used. The ANN technique has proved its efficiency since its correlation coefficients, mean prediction errors (MPEs), and root mean square errors (RMSEs) are small compared to the RSM approach. © 2022 Novel Carbon Resource Sciences. All rights reserved.
date: 2022
publisher: Joint Journal of Novel Carbon Resource Sciences and Green Asia Strategy
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85147341425&doi=10.5109%2f6625790&partnerID=40&md5=51d750f282ffafbc1b34924db8102240
id_number: 10.5109/6625790
full_text_status: none
publication: Evergreen
volume: 9
number: 4
pagerange: 1003-1020
refereed: TRUE
issn: 21890420
citation:   Ador, M.S.H. and Kabir, S. and Ahmed, F. and Ahmad, F. and Adil, S.  (2022) Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid.  Evergreen, 9 (4).  pp. 1003-1020.  ISSN 21890420