<> "The repository administrator has not yet configured an RDF license."^^ . <> . . . "Flow properties of Cu/CNTs feedstocks: For powder injection molding"^^ . "In this study, the flow behavior of multi-walled carbon nanotubes (CNTs) reinforced copper matrix feedstocks is presented. The solid loadings in the copper feedstock were investigated in the ranges of 55-61 Vol. using binder. Pure copper (Cu) and Cu/CNTs feedstocks were compounded using internal mixer machine for homogenous dispersion of solids in the binder. The flow behavior were measured using a capillary rheometer in the shear rate range expected to occur during powder injection molding. An acceptable increasing trend in viscosity of the copper feedstock with powder loading was recorded. Cu/CNTs composite feedstocks showed viscosity more than 1000 Pa.s which is most probably due to the addition of CNTs and increasing trend in viscosity of Cu/CNTs was noted as well. The results also identified that the feedstock containing 59 vol. copper was most suitable for substitution of CNTs in Cu feedstock. © 2011 IEEE."^^ . "2011" . . . "2011 IEEE Colloquium on Humanities, Science and Engineering, CHUSER 2011"^^ . . . . . . . . . . . . . . "M."^^ . "Rafi Raza"^^ . "M. Rafi Raza"^^ . . "F."^^ . "Ahmad"^^ . "F. Ahmad"^^ . . "A.S."^^ . "Muhsan"^^ . "A.S. Muhsan"^^ . . . . . "HTML Summary of #1527 \n\nFlow properties of Cu/CNTs feedstocks: For powder injection molding\n\n" . "text/html" . .