%0 Conference Paper
%A Muhsan, A.S.
%A Ahmad, F.
%A Rafi Raza, M.
%D 2011
%F scholars:1527
%K Capillary rheometer; Copper matrix; Flow behaviors; Flow properties; Internal mixers; PIM; Powder injection molding; Powder loading; Pure copper; Solid loading, Binders; Carbon nanotubes; Compounding (chemical); Copper; Flow fields; Metallic matrix composites; Reinforced plastics; Viscometers; Viscosity, Feedstocks
%P 476-480
%R 10.1109/CHUSER.2011.6163776
%T Flow properties of Cu/CNTs feedstocks: For powder injection molding
%U https://khub.utp.edu.my/scholars/1527/
%X In this study, the flow behavior of multi-walled carbon nanotubes (CNTs) reinforced copper matrix feedstocks is presented. The solid loadings in the copper feedstock were investigated in the ranges of 55-61 Vol. using binder. Pure copper (Cu) and Cu/CNTs feedstocks were compounded using internal mixer machine for homogenous dispersion of solids in the binder. The flow behavior were measured using a capillary rheometer in the shear rate range expected to occur during powder injection molding. An acceptable increasing trend in viscosity of the copper feedstock with powder loading was recorded. Cu/CNTs composite feedstocks showed viscosity more than 1000 Pa.s which is most probably due to the addition of CNTs and increasing trend in viscosity of Cu/CNTs was noted as well. The results also identified that the feedstock containing 59 vol. copper was most suitable for substitution of CNTs in Cu feedstock. © 2011 IEEE.
%Z cited By 0; Conference of 2011 IEEE Colloquium on Humanities, Science and Engineering, CHUSER 2011 ; Conference Date: 5 December 2011 Through 6 December 2011; Conference Code:89137