relation: https://khub.utp.edu.my/scholars/1527/
title: Flow properties of Cu/CNTs feedstocks: For powder injection molding
creator: Muhsan, A.S.
creator: Ahmad, F.
creator: Rafi Raza, M.
description: In this study, the flow behavior of multi-walled carbon nanotubes (CNTs) reinforced copper matrix feedstocks is presented. The solid loadings in the copper feedstock were investigated in the ranges of 55-61 Vol. using binder. Pure copper (Cu) and Cu/CNTs feedstocks were compounded using internal mixer machine for homogenous dispersion of solids in the binder. The flow behavior were measured using a capillary rheometer in the shear rate range expected to occur during powder injection molding. An acceptable increasing trend in viscosity of the copper feedstock with powder loading was recorded. Cu/CNTs composite feedstocks showed viscosity more than 1000 Pa.s which is most probably due to the addition of CNTs and increasing trend in viscosity of Cu/CNTs was noted as well. The results also identified that the feedstock containing 59 vol. copper was most suitable for substitution of CNTs in Cu feedstock. © 2011 IEEE.
date: 2011
type: Conference or Workshop Item
type: PeerReviewed
identifier:   Muhsan, A.S. and Ahmad, F. and Rafi Raza, M.  (2011) Flow properties of Cu/CNTs feedstocks: For powder injection molding.  In: UNSPECIFIED.     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84858990462&doi=10.1109%2fCHUSER.2011.6163776&partnerID=40&md5=083c9abfb00163b00bd01d4ae09fb936
relation: 10.1109/CHUSER.2011.6163776
identifier: 10.1109/CHUSER.2011.6163776