eprintid: 15263
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/52/63
datestamp: 2023-11-10 03:29:52
lastmod: 2023-11-10 03:29:52
status_changed: 2023-11-10 01:59:03
type: article
metadata_visibility: show
creators_name: Abdelmohimen, M.A.H.
creators_name: Algarni, S.
creators_name: Almutairi, K.
creators_name: Ahmed, G.M.S.
creators_name: Irshad, K.
creators_name: Irfan, S.A.
title: Improving Heat Transfer of Plate-Fin Heat Sinks Using through Rod Configurations
ispublished: pub
keywords: Nusselt number; Reynolds number; Shear stress, Flow direction; Impinging flow; K omegas; Plate-fin heat sink; Pumping power; Rod configurations; Shear-stress transport; Suction flow, Fins (heat exchange)
note: cited By 6
abstract: The performance of the heat sink has been investigated as using rods through its fins. The shear-stress transport k-� model is selected to carry out this study. Two different flow directions have been studied. Four cases are represented, including the baseline case which has no rods through the fins. Two, four, and six rods are used through the fins. Thermal resistance, pumping power, and Nusselt number have been represented and discussed through this study. The results show that as the number of rods increases, the thermal resistance decreases while the required pumping power increases. The impinging flow direction shows higher performance as compared with the suction flow direction. As the Reynolds number increases, the Nusselt number increases for all studied cases. The optimum case along with the studied range of Reynolds number and number of rods is case-2 (has four rods through fins). © 2020 Georg Thieme Verlag. All rights reserved.
date: 2021
publisher: American Society of Mechanical Engineers (ASME)
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086897529&doi=10.1115%2f1.4046984&partnerID=40&md5=b520668858418ce36fad59a73f9520d1
id_number: 10.1115/1.4046984
full_text_status: none
publication: Journal of Thermal Science and Engineering Applications
volume: 13
number: 1
refereed: TRUE
issn: 19485085
citation:   Abdelmohimen, M.A.H. and Algarni, S. and Almutairi, K. and Ahmed, G.M.S. and Irshad, K. and Irfan, S.A.  (2021) Improving Heat Transfer of Plate-Fin Heat Sinks Using through Rod Configurations.  Journal of Thermal Science and Engineering Applications, 13 (1).   ISSN 19485085