TY  - JOUR
N1  - cited By 2
N2  - The current study is conducted to develop an optimized corrosion resistant method. Low carbon steel (A-36) is used with five different coatings along with an uncoated sample, t o characterize t he behavior against corrosion. Specimens are coated with red oxide primer, oil paint, and oil paint-primer. Coatings are also made by mixing nanoparticles of titanium oxide (TiO2) and zinc oxide (ZnO) with oil paint. One molar nitric acid (HNO3) solution is used to produce acidic medium, one molar sodium hydro-oxide (NaOH) solution is used to make basic medium and distilled water is used as a neutral medium. The linear polarization resistance (LPR) technique is used to determine the corrosion rate of different coatings in all conditions. In the acidic environ-ment, the bare sample gives maximum corrosion of 191.5 mpy. The corrosion rate is decreased when coated with primer and paint respectively. But the minimum value of 0.302 mpy is observed in zinc oxide nanoparticles based coatings. In basic medium corrosion rate is observed to be low in bare and all types of coatings compared to the acidic environment. It shows that mild steel produces less metal oxides in a basic environment. The corrosion rate trend in the basic medium is the same having maximum in the bare sample (i.e. 0.1044 mpy) while minimum in zinc oxide-based coating (i.e. 0.000261). In distilled water, the bare sample gives maximum corrosion rate of 12.98 mpy as expected. Comparing three environments, acidic medium gives the highest corrosion rate in bare samples and in all coatings. Hence proper attention should be given when mild steel is being used in an acidic environment. The maximum corrosion rate is observed in bare samples while minimum in specimen coated with zinc oxide-based coatings. Hence it can be concluded that for better corrosion resistance, a coating made by mixing paint with zinc oxide nanoparticles should be used that works in all environments. Current study can be considered as easy to use solution for corrosion prevention in different corrosive environments. © 2021 CSIC Consejo Superior de Investigaciones Cientificas. All rights reserved.
IS  - 2
TI  - Comparative investigation of corrosion rate on A-36 steel with different coatings include ZnO and TiO2 nanoparticles using linear polarization resistance technique Comparación de la velocidad de corrosión del acero A-36 recubierto con nanopartículas de ZnO y TiO2 utilizando la resistencia de polarización lineal
ID  - scholars15037
KW  - Corrosion prevention; Corrosion rate; Corrosion resistance; II-VI semiconductors; Low carbon steel; Mixing; Nanoparticles; Nitric acid; Oxide minerals; Paint; Polarization; Sodium hydroxide; Steel corrosion; TiO2 nanoparticles; Titanium alloys; Titanium dioxide; Zinc alloys; Zinc coatings; Zinc oxide; ZnO nanoparticles
KW  -  Acidic environment; Acidic mediums; Corrosion-resistant; Corrosive environment; Distilled water; Linear polarization resistance; Zinc oxide (ZnO); Zinc oxide nanoparticles
KW  -  Corrosion resistant coatings
AV  - none
A1  - Akhtar, M.
A1  - Lashari, M.I.
A1  - Muzamil, M.
A1  - Sattar, M.
A1  - Shabir, M.I.
A1  - Mohsin, S.
A1  - Samiuddin, M.
JF  - Revista de Metalurgia
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85110374281&doi=10.3989%2fREVMETALM.193&partnerID=40&md5=eb77d17ae2fadb1f9544e4c383ddd101
VL  - 57
Y1  - 2021///
PB  - CSIC Consejo Superior de Investigaciones Cientificas
SN  - 00348570
ER  -