eprintid: 14419
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/44/19
datestamp: 2023-11-10 03:29:00
lastmod: 2023-11-10 03:29:00
status_changed: 2023-11-10 01:56:51
type: article
metadata_visibility: show
creators_name: Rahmawati, R.
creators_name: Bilad, M.R.
creators_name: Nawi, N.I.M.
creators_name: Wibisono, Y.
creators_name: Suhaimi, H.
creators_name: Shamsuddin, N.
creators_name: Arahman, N.
title: Engineered spacers for fouling mitigation in pressure driven membrane processes: Progress and projection
ispublished: pub
keywords: 3D printers; Channel flow; Geometry; Membrane fouling; Membranes; Mixing; Turbulence, Air bubbles; Fouling control; Fouling mitigation; Local mixing; Membrane filtrations; Membrane fouling control; Membrane process; Plate-and frame; Spacer geometry; Spiral-wound module, Microfiltration
note: cited By 24
abstract: Membrane fouling remains a major obstacle in liquid-based membrane processes, which restricts widespread applications of membrane-based processes. Approaches for membrane fouling control have been reported, including development of spacers. Typically, a spacer is required to provide a flow channel for the feed and permeate, to induce local mixing, and more recently to facilitate membrane fouling control. Those critical roles of a spacer could be enhanced by improving spacer design and geometry as discussed in the present paper. This study provides a comprehensive review on recent development of spacers incorporated in the plate-and-frame as well as in the spiral wound modules (SWMs), particularly on the spacer roles in membrane fouling control. The hydraulic performances of filtration systems incorporating new spacer along with the spacer's impacts against biofouling are extensively discussed. Lastly, perspective on the future development of spacer in aiding membrane fouling control has also been proposed. Research results demonstrated the possibility to modify spacer geometry � more recently � made from 3D printing to enhance the module throughput. The spacer geometry has been modified to reduce pressure loss, improve local mixing and promote turbulence, and to reduce dead zones. Application of new spacer geometries with reduced stagnation zone and coating of spacer surface with biocide agent have shown effective in reducing the propensity of biofouling. In the plate-and-frame module, spacers have successfully been used to enhance air bubble distribution in liquid/gas streams, promote turbulence as well as projecting the air bubbles toward the membrane surface for effective membrane cleaning. © 2021 Elsevier Ltd
date: 2021
publisher: Elsevier Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85114249121&doi=10.1016%2fj.jece.2021.106285&partnerID=40&md5=e85b7602be9bd02279d1bb75ee146556
id_number: 10.1016/j.jece.2021.106285
full_text_status: none
publication: Journal of Environmental Chemical Engineering
volume: 9
number: 5
refereed: TRUE
issn: 22133437
citation:   Rahmawati, R. and Bilad, M.R. and Nawi, N.I.M. and Wibisono, Y. and Suhaimi, H. and Shamsuddin, N. and Arahman, N.  (2021) Engineered spacers for fouling mitigation in pressure driven membrane processes: Progress and projection.  Journal of Environmental Chemical Engineering, 9 (5).   ISSN 22133437