TY  - JOUR
AV  - none
N1  - cited By 0; Conference of 2nd Regional Conference on Mechanical and Marine Engineering, ReMME 2018 ; Conference Date: 7 November 2018 Through 9 November 2018; Conference Code:235599
N2  - The diffusion bonding is one of the methods used to join dissimilar metals. Specimens of duplex stainless steel and low carbon steel were joined by diffusion bonding under varied temperature and holding time. The specimens were clamped using jigs and heated in a furnace. Tensile test was performed on the joined samples. The effect of bonding time and holding temperature on tensile strength and quality of the diffusion bonds were observed. Tensile strength of the joints was examined and the highest tensile strength of 116.12 MPa are obtained at temperatures of 900 °C and holding time of 180 min. © 2020, Springer Nature Singapore Pte Ltd.
TI  - Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel
ID  - scholars14002
SP  - 333
KW  - Diffusion; Low carbon steel; Tensile strength; Tensile testing
KW  -  Bonding time; High-tensile strength; Holding temperatures; Holding time; Low-carbon steels; Steels carbons; Time-temperature
KW  -  Diffusion bonding
Y1  - 2020///
PB  - Springer Science and Business Media Deutschland GmbH
SN  - 21954356
A1  - Baharudin, B.A.
A1  - Hussain, P.
A1  - Mustapha, M.
A1  - Ayob, F.
A1  - Ismail, A.
A1  - Ab Rahman, F.
A1  - Khalid, P.Z.M.
A1  - Hamid, D.A.
A1  - Rojan, M.A.
JF  - Lecture Notes in Mechanical Engineering
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85077865826&doi=10.1007%2f978-981-15-0002-2_34&partnerID=40&md5=68b9e80dcb9219716c33045dd8066017
EP  - 338
ER  -