eprintid: 1368
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/13/68
datestamp: 2023-11-09 15:49:31
lastmod: 2023-11-09 15:49:31
status_changed: 2023-11-09 15:39:35
type: article
metadata_visibility: show
creators_name: El-Harbawi, M.
creators_name: Razali, Z.A.B.
creators_name: Fuzi, S.M.F.B.S.M.
creators_name: Mustapha, S.
title: Development of a layer of protection analysis tool to determine the safety integrity level in process industries
ispublished: pub
keywords: Accident prevention; Chains, Accident scenarios; Event tree analysis; Independent protection layers; Layer of protection analysis; Risk based approaches; Safety instrumented systems; Safety integrity levels; Sequence of events, Safety engineering
note: cited By 1
abstract: The purpose of this study was to develop a tool to determine the Safety Integrity Levels (SILs) using Layer of Protection Analysis (LOPA) method. Various methods can be used in determining this SIL. However, LOPA has been chosen as the risk-based approach to evaluate the potential consequences and likelihood. Many factors could be considered in order to complete this task. To implement LOPA procedure in the real situation, an industry plant operation had been selected as a case study. The work had been initiated by gathering the information on SIL. Event Tree Analysis (ETA) has been used to develop the scenarios of each initiating events. Then undesirable outcomes of accident scenarios have been calculated. A tool is developed to generate the scenarios or sequence of events that result in undesirable outcomes. Each scenario consists of two elements which are the initialing event that starts the chain of events and a consequence that results if the chain of events continues without interruption. Finally and after developing the scenarios, the identified initiating event frequency and related Independent Protection Layers (IPLs) is generated. There are 25 initiating events that have been listed in order to proceed with LOPA. © 2010 Asian Network for Scientific Information.
date: 2010
publisher: Asian Network for Scientific Information
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-78049374342&doi=10.3923%2fjas.2010.3319.3324&partnerID=40&md5=e2a1051f2bc8decfe33c0d89456fdbe2
id_number: 10.3923/jas.2010.3319.3324
full_text_status: none
publication: Journal of Applied Sciences
volume: 10
number: 24
pagerange: 3319-3324
refereed: TRUE
issn: 18125654
citation:   El-Harbawi, M. and Razali, Z.A.B. and Fuzi, S.M.F.B.S.M. and Mustapha, S.  (2010) Development of a layer of protection analysis tool to determine the safety integrity level in process industries.  Journal of Applied Sciences, 10 (24).  pp. 3319-3324.  ISSN 18125654