relation: https://khub.utp.edu.my/scholars/1367/
title: Preparation and characterization of copper feedstock for metal injection molding
creator: Goudah, G.
creator: Ahmad, F.
creator: Mamat, O.
creator: Omar, M.A.
description: Powder loading is one of the most critical factors which have important influence on metal injection molding processes. In this study, four different loading feedstocks were prepared from gas atomized copper powder with wax-based binders. Mixes of four feedstocks with 2 Vol.  incremental powders loading from 55 to 61 Vol.  were carried out in a Z-blade mixer. The injection molding was carried out at low pressure. A combination of solvent and thermal debinding was used for binder removal from the samples and then the sintering process take place in argon gas at 900°C. It was observed that the feedstock containing 59 Vol.  of copper produce a free defect samples which was selected as the optimum feedstock. © 2010 Asian Network for Scientific Information.
publisher: Asian Network for Scientific Information
date: 2010
type: Article
type: PeerReviewed
identifier:   Goudah, G. and Ahmad, F. and Mamat, O. and Omar, M.A.  (2010) Preparation and characterization of copper feedstock for metal injection molding.  Journal of Applied Sciences, 10 (24).  pp. 3295-3300.  ISSN 18125654     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-78049376936&doi=10.3923%2fjas.2010.3295.3300&partnerID=40&md5=0c4891625792d4ce838436f432dc2101
relation: 10.3923/jas.2010.3295.3300
identifier: 10.3923/jas.2010.3295.3300